Skip to product information
5600SXT Water Softener Resin Rebed Kit
$133.00
Reliable shipping
Flexible returns
Re-bedding a water softener will restore flow, and capacity to the unit if the softener beads were gelled, or damaged over time.
As resin beads age, their ability to eliminate hard minerals such as calcium and magnesium diminishes, leading to decreased water softening effectiveness.
Note: chlorine degrades the resin at a higher rate. Many people have carbon whole house pre treatment before a softener. If going that route then 8 percent resin is fine. If the softener is supplied with city water with no chlorine pre-treatment then it is better to go with 10 percent resin instead of 8 percent as it is somewhat more resistant to chlorine.
* Refer below chart to identify your required quantity.
| Tank Size | Resin Quantity | Gravel Quantity |
| 8" x 35" | 0.64 cubic feet | None |
| 8" x 44" | 0.75 cubic feet | None |
| 9" x 35" | 0.75 cubic feet | None |
| 9" x 40" | 1.00 cubic feet | None |
| 9" x 48" | 1.00 cubic feet | None |
| 10" x 35" | 1.00 cubic feet | None |
| 10" x 40" | 1.00 cubic feet | None |
| 10" x 44" | 1.25 cubic feet | Optional - 15 lbs. |
| 10" x 54" | 1.50 cubic feet | Optional - 15 lbs. |
| 12" x 52" | 2.00 cubic feet | Optional - 20 lbs. |
| 13" x 54" | 2.50 cubic feet | Recommended - 35 lbs. |